BÖHLER K605 is approximately equivalent to the material 1.2721 (~50NiCr13). The alloy concept of this tool steel is similar to the one of 1.2767. With its high nickel content, this material offers a very good combination of through hardenability and toughness. The higher carbon content compared to material 1.2721 results in a better hardening response and consequently higher compressive strength. The material is used in applications such as forming, bending and embossing tools.
| Compressive strength | Dimensional Stability in heat treatment | Toughness | Wear resistance abrasive |
|---|---|---|---|
|
|
|
|
|
| SEL | EN |
|---|---|
| ~1.2721 | ~50NiCr13 |
| C | Si | Mn | Cr | Mo | Ni | |
|---|---|---|---|---|---|---|
| 0.55 | 0.30 | 0.40 | 1.00 | 0.25 | 3.00 |
Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).
