BÖHLER M261 is a precipitation-hardening steel grade for plastic moulds, featuring excellent machinability in the as-supplied, i.e. solution annealed and aged, condition. There is no need for an additional heat treatment, significantly shortening the workload time.
| Etchability | Machinability in as-supplied condition | Polishability | Through hardenable | Toughness | Wear resistance |
|---|---|---|---|---|---|
|
|
|
|
|
|
|
| EN | EN |
|---|---|
| X13NiCuAlS4-1-1 | X13NiCuAl4-1-1 |
| C | Si | Mn | S | Cr | Ni | Cu | Al | |
|---|---|---|---|---|---|---|---|---|
| 0.13 | 0.30 | 2.00 | 0.15 | 0.35 | 3.50 | 1.20 | 1.20 |
Information on Long Products ) Presented data refer exclusivly to long products. Please observe the detailed explanations at the end of the data sheet (pdf).
